STUDIO OCEAN MARK Lefthanded Jigging Reel Z-Japan BLUE SAFARI BS35 Hi/L-BB/D(24)

STUDIO OCEAN MARK Lefthanded Jigging Reel Z-Japan BLUE SAFARI BS35 Hi/L-BB/D(24)

Introducing a new standard reel that fully incorporates epoch-making mechanisms such as a new drag system “WING DRAG” that has never been seen before, and a 2-speed level winder that suppresses line biting.

The drag system, which consists of multiple drag washers, is covered with waterproof rubber.
It prevents water from entering the drag disc even in offshore conditions where it is constantly exposed to water, contributing to a stable drag at all times.
Interlocking level winder.Functional when line release as well. In addition, the level winder has been made 2-speed.
The 2-speed level winder repeats tight winding and twill winding in a round trip, so you can fight with fish without worrying that the line will not bite even under high tension.
Aluminum machine cut gear box & frame inherited from Blue Heaven. Strong hoisting power is achieved with excellent body rigidity and high module gear that does not distort even when drag load is applied. The transmission efficiency of the hoisting force has been improved by 9%* compared to the No. 300 class of other companies.
The handle knob adopts AG41 ready for a fight with a big game. The handle arm is a variable system of 76mm and 63mm, designed to be counterbalanced at 76mm and fully balanced at 63mm.
The 76mm counterbalance makes it easy to operate when jigging , and the 63mm it is perfectly balanced for hairtail jigging and tie rubber, making it possible to easily perform one-pitch and constant-speed winding.
In this way, one handle can be set according to the target and fishing method.
BS35 uses a wide spool.
By widening the spool, there is little change in the amount of winding due to water depth, enabling better jig control.
Adopted a system that can easily replace the spool with one screw on the gear box side.

Light drag setting(4 steps up to MAX)
1.Tilt the wing drag forward.
2.Turn the preset knob to set the initial drag value.
4.The drag value can be adjusted step by step by tilting the wing drag to the back (up).

Intermediate drag setting (2 steps to MIN, 2 steps to MAX)
1.Move the wing drag to the center as shown in the picture.
2.Turn the preset knob to set the initial drag value.
3.When the wing drag is pushed forward (down), the drag value increases, and when pushed backward(up), the drag value decreases.

BLUE SAFARI 35Hi
Gear Ratio: 6.7:1
Retrieve :90cm
Drag Max: 8kg
Cap. : PE 2.0-300m
Weight: 425g
MADE IN JAPAN

Softshell Reel Pouch Included